Forum - Cypress Control Center and Drivers

From UCLA Miniscope
Jump to: navigation, search
Overview > Troubleshooting > System Assembly Troubleshooting > Cypress Control Center and Drivers Write a reply
[#29]

Hi, Just some additional info that can be useful before you start uploading firmware to the DAQ. If you do not have Cypress Control Center - go to cypress.com and download the CySuiteUSB_3_4_7_B204.exe, then install SuiteUSB 3.4 - USB Development tools for Visual Studio. Proper drivers - do to device manager and select the unidentified device, update driver with the CYUSB.sys that you can find in below directory. C:\Program Files (x86)\Cypress\EZ-USB FX3 SDK\1.3\driver\bin After the driver update the DAQ will be visible in Control Center as Cypress USB. Now you are good to start uploading firmware.

Posted by Mkislin on 5 April 2016 at 20:09.

Thanks for the info Mkislin!

Posted by DAharoni (administrator) on 6 April 2016 at 01:18.
Retrieved from "http://miniscope.org/index.php/Special:WikiForum/Cypress_Control_Center_and_Drivers"