Difference between revisions of "Main Page"

From UCLA Miniscope
Jump to: navigation, search
(Update Log)
Line 42: Line 42:
  
 
== Update Log ==
 
== Update Log ==
 +
;02/03/2016
 +
;Updated Surgery Tools on Miniscope Master Parts List
 
;01/28/2016
 
;01/28/2016
 
:Added PCB price quotes to reference when ordering PCB fabrication and assembly through Sierra Circuits. They can be found on the [[Part Procurement]] page.
 
:Added PCB price quotes to reference when ordering PCB fabrication and assembly through Sierra Circuits. They can be found on the [[Part Procurement]] page.

Revision as of 13:42, 3 February 2016

Miniscopev2.JPG

Welcome to Miniscope.org Wiki!

The miniature fluorescence microscope described here is based on a design pioneered by Mark Schnitzer's Lab at Stanford and published in a paper in Nature Methods in 2011. It uses wide-field fluorescence imaging to record neural activity in awake, freely moving mice. The microscope introduced here (miniscope) has a mass of around 3 grams and uses only a single, flexible coaxial cable (0.3mm to 1.5mm diameter) to carry power, control signals, and imaging data. The goal of this wiki site is to provide a centralized location for sharing design files, source code, and other relevant information so that a community of users can share ideas and developments related to this important technology. The initial goal is to help disseminate this technology to the larger neuroscience community so that we can build a community of users that will continue to develop this technology and share on these developments. While the miniscope system described here is not an off-the-shelf commercial solution, we have focused on making it as easy as possible for a standard neuroscience lab to build and modify, requiring minimal soldering and hands on assembly. For more information please visit the Project Overview page. The Miniscope project and miniscope.org are still works in progress and will be routinely updated over the coming months and years. We hope you will contribute to this important process!

Current Status of Project

The Miniscope project is now in its third year of development at UCLA and has gone through two major revisions. The work and files available on this site are the most up-to-date public version of our system and will be updated frequently with improvements and new system features. Again, we hope that you will contribute to this development process! This wiki is designed for this very purpose.

Initial access to the miniscope.org wiki was enabled mid January, 2016.

Important: Using this system we have successfully imaged Hippocampal CA1, Subiculum, and Visual Cortex using 1.8mm and 2mm diameter GRIN lenses from Grintech. While thinner GRIN lenses should theoretically be compatible with our system we have limited our initial development to larger lenses due to supply and experimental constraints. We are now actively testing thinner lenses as well as pursuing multiple avenues of GRIN lens production (More information on GRIN lenses can be found here).

Links to information on miniscope subsystems

Overview System.png
Head Mounted Scope
Data Acquisition Box
Data Acquisition Software
Surgery Protocol
Master Parts List
Analysis Package


Discussion Board and FAQ

Discussion Board
FAQs

Guides and Tutorials

A key feature of this effort is to design miniscope systems that are easy to build and use. The guides below will walk you through component procurement, scope assembly, and software installation.

  1. Overview of System Components
  2. Part Procurement
  3. System Assembly
  4. Recommended Computer Specs
  5. Software and Firmware Setup
  6. Surgery Protocol
  7. Animal Behavior Guide

Update Log

02/03/2016
Updated Surgery Tools on Miniscope Master Parts List
01/28/2016
Added PCB price quotes to reference when ordering PCB fabrication and assembly through Sierra Circuits. They can be found on the Part Procurement page.
01/27/2016
IMPORTANT: Updated CMOS Imaging Sensor PCB Fabrication file to newest version
01/20/2016
Updated Surgery Tools on Miniscope Master Parts List
Added GRIN lens specifications on GRIN Lens Information page
Updated the PCB Assembly documents on Github will a more detailed description of SMD LED orientation
Slight modification to the Baseplate 3D model on Github
01/14/2016
Comments added to segmentation functions
Added through-hole components for DAQ PCB on Master Parts List
Added additional soldering tools on Master Parts List
01/13/2016
Added basic surgery outline
Added a picture guide for scope and Baseplate assembly
01/12/2016
Finalizing of Miniscope Master Parts List
01/10/2016
Upload of current version of all files and documents to Github
01/09/2016
Added guide to programming firmware to DAQ PCB