Author Topic: Controlling a second LED (Optogenetics)  (Read 1738 times)

ivo.sonntag

  • Newbie
  • *
  • Karma: +0/-0
    • View Profile
Controlling a second LED (Optogenetics)
« on: November 09, 2017, 01:20:37 PM »
Hi Daniel,
is it currently possible to run a second LED from the cmos board, e.g. for optogenetic stimulation?

Cheers,
Ivo

Daniel Aharoni

  • Administrator
  • Full Member
  • *****
  • Karma: +15/-0
    • View Profile
Re: Controlling a second LED (Optogenetics)
« Reply #1 on: November 11, 2017, 09:35:29 PM »
Hi Ivo,
Yes it is but it requires a different LED PCB and also will require a slight change in the firmware running on the DAQ PCB. I haven't fully tested out our 2 LED system yet but I would be happy to share with you everything we have done so far. Shoot me an email when/if you are interested (DBAharoni@gmail.com).