Topics

1

DAQ Software/Firmware / exposure time and frame rate

« on: July 01, 2017, 03:03:56 PM »

Hello, we did test the scope by Inscopix, which has exposure time numbers automatically adjusted by frame rate. But our miniscope show only the constant number 100 to 255 while adjusting the frame rate. In our software, it automatically calculate and assign the maximum exposure time as 255 depended on frame rate ?? Or, we need to recalculate and adjust the exposure time value by frame rate? Thank you
dylan   

2

General Discussion / upcoming workshop

« on: April 17, 2017, 04:38:29 PM »

Hello, Our team members are interested in the upcoming workshop. When it will be opening? Thank you!

3

DAQ Software/Firmware / mscam frame retrieval error

« on: April 08, 2017, 04:19:57 PM »

Hello, We need your help..
 We personally ordered the 3.2v CMOS and DAQ PCB not by UCLA groups. Placed switches and successfully uploaded firmware with K2 K1. But then, only connected with K2 and CMOS, it failed to get frame retrieval. The red LED on CMOS and the Blue LED lit up, but we were not able to adjust the intensity. And the cognition as MINISCOPE in device manager happened 'rarely'.
We used Cooner Wire 50ohm coax and USB3.0 cable. (changed 2 different 3.0 cable, but it failed as well)
5V in J4, 2.5V in blue LED, 1.7V(not exactly) in red LED.